Hygienic toilet shower

Hygiene plays an important role for every person. The rules and understanding of its necessity are laid from early childhood. From it depends on life expectancy. However, the concept of cleanliness for each nation is different. For example, in most developed countries it is almost impossible to find a bathroom without a bidet. In the post-Soviet space, people do not often install such products. Someone is trying to save money, not understanding the purpose of plumbing, someone just does not have enough space. Owners of small premises should not refuse to improve living conditions, they can use a hygienic shower for the toilet. It performs all the functions of a small bath with a fountain.

Features and design of hygienic shower

The sanitary device used for hygiene is visually similar to a standard bathroom shower. A small difference is in the flow of the jet. It is much smaller, does not dissipate. The device has a simple design, consists of the following nodes:

  1. Mixer. Hot and cold water is supplied to it. By means of the lever the pressure of a stream is regulated.
  2. Flexible hose It consists of an inner tube, outer sheath, two nuts used to attach it to the watering can and the mixer.
  3. Watering can. Contains a special button to supply water, even when the mixer is turned on, the jet will not run until it is pressed. There are many models that differ in shape.
  4. Holder. Mounted on the wall next to the toilet. On him hang a shower.
  5. Thermostat. High-quality expensive products are equipped with a special device that allows you to adjust the temperature.

When buying a hygienic shower you should not save, it is better to take a model with the device to maintain a constant temperature. With it, you can be sure that hot water will not cause unexpected burns.

Advantages and disadvantages

When choosing a product to maintain body hygiene, it is important to know its merits. The main advantage is the compact design. It takes up little space, so it is suitable for small rooms. Also, the positive characteristics of the soul include:

  • Multifunctional. In addition to the direct destination, the product allows cleaning the toilet, collecting water for various needs, rinsing shoes, and performing other tasks.
  • Saving cash. Due to the relatively low cost, the equipment is available to most citizens. Allows you to partially or completely abandon the use of toilet paper.
  • Versatility. Suitable for use by all family members. It will become an indispensable item for pregnant women in the postpartum period, for those suffering from hemorrhoids, who have undergone rectal surgery, for the elderly, who need comfort and simplified daily procedures.
  • Easy installation. For those who can independently make the layout for the water supply, it is easy to install the element with your own hands.
  • Ergonomic. An effective device that saves time and energy in its application.

Like any object, the shower has certain disadvantages, but they are not critical. The disadvantages include:

  • The subject is inconvenient when used in a cramped room for large and fat people.
  • Not protected from children who can use it for other purposes. After their games remain puddles on the floor.
  • Some models that are built into the toilet are connected only to hot or cold water.
  • When reducing the pressure is difficult to find the optimal temperature.

Types of hygiene systems

The concept of hygienic shower combines various products that differ in appearance, installation method, design features. Depending on the type of mixer, the following models can be distinguished:

  1. Lever. Head and temperature is regulated by a simple mechanism, by changing the position of the lever.
  2. Two-valve. Reliable option, which has a valve system to control the flow of water.

By type of construction and installation method, the following types can be distinguished:

  1. Wall. There are built and installed on the wall options.
  2. Hygienic shower mixer.
  3. Products with a thermostat.

There are options that are mounted directly to the toilet:

  1. Cover - bidet.
  2. Toilet bowl - bidet.

For a large room, combined with a bathroom, you can install a full bidet. They are much more convenient to use, which will avoid puddles on the floor, and the lid of the toilet bowl will remain dry.

Wall shower

In appearance, the design is similar to a standard shower. Its installation is carried out directly near the toilet. Having stopped the choice on such a product, it is recommended to give preference to models in which the mixer has no spout. According to the installation method, there are two main types: built-in and open, which are fixed on the wall.

Open options have less cost. They are easier to install, they crash into pipelines, the holder is mounted on the wall, the watering can is connected to the mixer with a hose. When carrying out repairs, dismantling the system is very simple.

Hidden designs are more popular and in demand. Although the price of such products is higher than that of the previous analogue, but they can significantly improve the aesthetic appearance of the room. Installing an item is quite difficult. To do this, it is necessary to dismantle the decoration on the walls, to perform a major overhaul in the toilet.

In the case when during the installation of the product no repair measures are planned, it is necessary to equip a special sanitary cupboard that will hide all the design flaws. This method is inconvenient for models without a thermostat, as it is constantly necessary to adjust the temperature.

Bidet

Bidet is a small bath with a fountain. In appearance it looks like a small toilet, which has no toilet cistern. In addition to its intended purpose, it can be used for washing feet and hands. This is an indispensable device for people with disabilities, older people who are uncomfortable using a standard sink. According to the installation method, there are two main types:

  1. Outdoor. The most popular option. Installation is similar to the toilet. They consist of a bowl in which there is a mixer with a fountain. The jet of water can be normal, pulsating, saturated with air.
  2. Wall mounted. Less common. They are attached to the wall with the help of inconspicuous supporting elements, which are located behind the partition along with sanitary communications. This design simplifies cleaning the toilet, as it allows you to wash the floor under it.

Bidets differ in sewer type, which can be:

  • horizontal;
  • vertical;
  • oblique.

The materials used in the production of items are as follows:

  1. Plumbing faience. The service life is 30-40 years. The structure of the material is loose, but the price is lower than that of porcelain structures.
  2. Sanitary porcelain. Raw materials are no pore structure, it does not absorb odors. You can operate the product for 50-60 years.

By type of accommodation can be identified:

  • freestanding;
  • combined

Toilets with bidet function

The main feature of such structures is their functionality. Here are combined two products in one. Outwardly, they practically do not differ from the standard toilet, except for the elongated shape of the bowl and the larger tank. This is a good option for any bathroom, it does not require a lot of space.

Water to perform the function of a bidet is supplied through special nozzles, which are located at the fitting under the rim of the bowl. There are options for which the mechanical sprayer is built into the side of the bowl. The tank contains electronic equipment with which the procedures are managed.

Toilets-bidets often have many additional features:

  • Backlight. Allows you to conveniently use the product when turning off the light in the house.
  • Thermostat. Used to control the temperature of the water supply.
  • Heated seat. Increases comfort, especially important in the cold season.
  • Hair dryer For drying after rinsing.
  • The function of hydro, aero massage.
  • A device that analyzes the biomaterial.

Seats (covers) with bidet function

The most important function of such products is the shower. There are many models that differ in features and characteristics. Many bidet seats have a heating system, drying, several modes of intensity of water supply. The more different bells and whistles of a new cover, the higher its price.

The lid with bidet function is designed to enhance comfort. Control is carried out from the side of the electronic panel. The sequence of actions can be programmed and carry out the procedure of washing by pressing just one key. Completeness of more modernized models complements a special remote.

The device does not require complex installation, it is simply put in the place of a normal seat, connected to water. Choosing a seat you need to understand that it does not fit every toilet bowl. Pre-should make measurements of the faience element.

Types of faucets for hygienic shower

Hygienic shower often installed on the wall, on either side of the toilet. By type of installation it can be hidden and external. This is a great alternative to a separate bidet. A simple device is endowed with all the necessary functions to maintain hygiene, does not take up much space, which is important for small bathrooms. There are several types of mixers that differ in design and capabilities. The most popular are:

  • Wall. The mixer does not have a spout, water is discharged through a flexible hose. Shower and holder for watering cans are attached to the wall;
  • Hooked on the sink. Option is possible if the sink is located near the toilet;
  • Built into the toilet. You can embed in the lid of any toilet. Mobile device can be transferred to another toilet. You can control it manually or using the remote control.

Self-installation of hygienic shower

When the model is selected and purchased, you can proceed to the installation. It is not obligatory for this to invite plumbing, any man will cope with a simple task. The method of installation will depend on the selected model. If this is a wall option, it is important to determine the correct location. Make it simple - you need to sit on the toilet and reach out to the wall. At the most convenient height make a mount for a small watering can. Before you begin, you should consider a few important points.

Installation height

The mixer and the watering can holder can be mounted on the same wall or on different ones. The main task affecting comfort when using is to choose a suitable height. There are no specific standards, installation is carried out on the basis of personal preference.

The product will look aesthetically pleasing if the mixer hose in a free state does not touch the floor, so you should not install the construction elements too low. When tiled cladding, you must choose a place at the junction, without decor and drawings.

When choosing a height for the mixer, it is necessary to take into account the age, the state of health of the household. If any of the relatives have signs of diseases that limit movement, you can sacrifice aesthetics and place the shower on the floor, in a prominent place.

Wall mount

For wall mounting, choose an open installation type. The mixer is fixed on the surface of the wall, through which the water supply will be carried out. Near at a convenient height set holder for watering can.

Now you can proceed to the installation of flexible hoses. Between all elements of prefabricated structures should be placed rubber gaskets. This will help prevent leakage. If seals are not included, they must be purchased separately.

You can also mount the shower to the wall in a hidden way. Option involves the organization of a niche, the creation of boxes. Water supply is provided by specially laid pipes, which are also hidden in a niche. Only the platform with the lever, the holder, the watering can remain on the surface. The method is more aesthetic, but not suitable for all rooms. The possibility of installation is influenced by the thickness of the walls, the location of the ventilation shafts.

Installing the shower on the sink

Installation is possible in the presence of a special model with its own outlet and an additional hole for the valve. This is a great option for a combined bathroom, in which the sink is located next to the toilet. The installation process of the device for intimate procedures is very simple. The length of the hose with a watering can should be enough to use the shower in the toilet area without tension.

For greater comfort of use, you need to buy a mixer with a thermostat. This will allow not to be distracted when carrying out hygienic procedures for constant regulation of water temperature. The device will allow you to set your temperature and save it automatically.

Mounting the lid-bidet on a conventional toilet

Installing a new multi-functional cover is similar in complexity to the simple replacement of a standard seat. We unscrew the plastic nuts in the bottom of the toilet bowl, remove the old product and place the new bidet seat, fixing it well.

Now we connect the water. Shut off its supply to the tank, remove the flexible hose and fasten a tee to it, carefully wrapping the inner joints with special tape or tow. In the upper part of the tee we fasten the hose from the tank, in the lower we insert the pipe into the water supply.

A power outlet is required for connection to the power supply. A place for it can be provided for during repair or to be electrically operated in an open way in the cable channel. Check the operation of the electronic panel, supply water. In just a few minutes, a simple toilet becomes a modern device.

The best manufacturers of toilet hygiene systems

Hygienic systems for toilet bowls are presented on the market in a huge range, with a set of various functions. There are budget, elite, average models. Choosing the right device is not easy. First you need to understand the configuration, evaluate the material of manufacture, the basic properties and characteristics of the mixers. According to consumer reviews, the following manufacturers produce the most practical, easy-to-install models:

  • Grohe. The German company gives the longest warranty for its products (10 years). Elements of shower systems are made convenient for use, the correct form, without sharp corners, relief. Nothing superfluous - only quality and simplicity;
  • Hansgroh. Also a company from Germany. Most of the manufactured systems are focused on small rooms;
  • Jacob Delafon. French craftsmen create only the highest quality design systems. The company confirms the longevity of products with a long warranty (5 years);
  • Oras. Toilet systems from the Finnish manufacturer require careful handling, less durable than the previous versions. The company is more focused on introducing various technical innovations;
  • Roca. Spanish products have an attractive appearance, easy to use. The price for the goods of this manufacturer is high, which is explained by the quality, long service life of all elements of the toilet hygiene system;
  • Vidima. Models produced showers have a traditional look, without too much glitter and all the excesses. Production facilities are located in Bulgaria, the products have a pleasant price.

Conclusion

The installed hygienic shower in the toilet should not only be in harmony with the general interior of the room, but also meet the standards concerning the location and installation method. Connecting a model of any configuration will be successful if you strictly follow the instructions and listen to the advice of experts. To do it yourself you will need a minimum set of tools and a couple of hours of time.

Watch the video: The Bum Gun Bidet Sprayer Installation Video English (March 2024).

Leave Your Comment